Free: 3 Incredible Dub Delay VSTs

These are 3 awesome dub delay plugs that I use consistently in my projects and you should too!

I have mentioned these virtual Dub Delay units more than once, but I think it’s high time I give them their own post on the blog.

They are made by TAL and each version has its own characteristics. If fact, TAL make so many great plugs that are free you should just go and download them all and try everything out for yourselves!

However, here are the free Dub Delay Plugs I was talking about.

Tal-Dub v.1

Get Tal-Dub V.1 – PIB/Dub.V.1

TAL-Dub is a vintage style delay effect. It can be used for a wide range of delay effects from clean to extreme distorted, resonating never ending delays 🙂

Features

  • 12dB resonance filter.
  • Low cut filter.
  • Maximal 4 Seconds delay time.
  • Limiter with distortion for rising feedbacks or loud inputs.
  • Delay time and feedback for each channel (linkable).
  • Input signal swap (L/R swap).
  • Filter feedback and filter fx mode (filter in feedback path or as post fx).
  • Filter mode for input (input signal will be filtered too).
  • Easy to use midi learn.
TAL-Dub_Plugin-original

Tal Dub Delay v.1

Tal-Dub v.2

Get Tal-Dub V.2 – PIB/Dub.V.2

TAL-DUB-II is an extended version of TAL-Dub-I with a completely new sound engine. A 4x oversampled distortion stage allows to add vintage distortion to the delayd signal, but its also possible to make clean delays.  A sinus LFO has the possibility to modulate delay time and low pass filter cutoff. Adjustable LFO stereo width is also included.

An analog sounding 6dB low pass filter with resonance and a 3dB high cut filter are also parts of TAL-DUB-II. Different routing options open a wide range of possibilities.

Features

  • Synced delay times (1/16, 1/8, 1/4, 1/2, 1/1, 2/1 and trippled and dotted notes).
  • 4x oversampled distortion stage.
  • VU-Meter shows gain reduction.
  • LFO (low pass cutoff and delay modulation, stereo width).
  • 6dB resonance low pass filter.
  • 3dB high pass filter.
  • Midi learn for all pots.
  • 20 factory presets.
  • Documentation.
TAL_Dub2_Plugin-original

Tal-Dub Delay v.2

Tal-Dub v.3

Get Tal-Dub V.3 – PIB/Dub.V.3

TAL-DUB-III is an easy to use delay device with some special features. Its no tape delay emulation and has its own sound. It has an alias free saturation stage, a non-linear 6dB low pass and a 3dB high pass filter that are included in the feedback path of the device. An input drive knob allows to adjust the saturation level. Pop-up menues show the current values of volume, delay-time and feedback knobs. A tab button allowing to adjust the delay time for live sessions.

Features

  • Delay time up to 4 seconds.
  • Non linear 6dB Low-Pass filter.
  • 3dB High Pass filter.
  • Alias free stauration, adjustable with the input drive knob.
  • Delay x2 for each channel.
  • Synced delay times (1/16, 1/8, 1/4, 1/2, 1/1, 2/1 and trippled and dotted notes).
  • Pop-ups show the actual values dB (input drive, dry, wet), ms(delay), 0..2 (feedback)
  • Led-meter shows the sturation level.
  • Tab button for delay time.
  • Midi Learn for all knobs.
  • The feedback knob is especially optimized for doing infinite delays.
TAL-DUB-3-original

Tal-Dub v.3

Share on Facebook123Tweet about this on TwitterShare on Google+2Pin on Pinterest2Share on StumbleUpon0Share on Reddit0Digg thisFlattr the authorShare on Tumblr1Share on VK

Author: Joshua Casper

Joshua Casper is an Artist, Musician, and Blogger.

Share This Post On

music-production-plugin-deals-april-2017

Hot Plugin Deals!!!